Caterpillar 3512B Electronic Unit Injector (EUI)
Specifications
| Component | Electronic unit injector (EUI) | |
|---|---|---|
| Part group | CAT 3500-EUI | |
| Engine | Caterpillar 3512B | |
| Configuration | Trim code upload to ECM required | |
| Function | Meters and atomises fuel per cylinder | |
| Condition | New / OEM-reman |
Technical notes
The electronic unit injector combines the fuel pump and nozzle in one unit per cylinder, with injection timing and quantity commanded electronically by the engine control module. After fitting, each injector's trim code must be uploaded to the control module so that the module compensates for unit-to-unit manufacturing variation and keeps cylinder fuelling balanced; skipping this step causes rough running and imbalance. Order by the engine's part group and confirm the control module software level. Renew injectors as a matched set across the engine where possible, and verify the trim codes are recorded on commissioning.
Compliance
Emission-relevant fuel system component; supplied to the engine's certified configuration. EPA emission certificate compliance applies to the engine build.
Compatibility
Related
●RFQ answered within ~4 h at major hubs routed to vetted suppliers no public pricing
Frequently asked questions
- What is an electronic unit injector?
- A combined fuel pump and nozzle per cylinder, with injection commanded electronically by the engine control module.
- Why upload a trim code?
- It lets the control module compensate for unit-to-unit variation and keep cylinder fuelling balanced.
- Should injectors be replaced as a set?
- Where possible, yes, to keep fuelling balanced across the engine.
Caterpillar 3512B Electronic Unit Injector (EUI)
No public pricing — quoted per request