Alfa Laval EPC 50 Separator Controller Board
Specifications
| Component | Separator controller board | |
|---|---|---|
| Designation | EPC 50 | |
| Function | Controls separator discharge cycle | |
| Protocols | MODBUS / PROFIBUS | |
| Separator family | Alfa Laval S / P series | |
| Configuration | Firmware set to engine-room protocol |
Technical notes
The EPC 50 controller board manages the separator's automatic discharge cycle, timing the bowl openings that eject accumulated solids, and it interfaces with the engine-room monitoring system. A replacement board must have its firmware configured to match the installed communication protocol, typically MODBUS or PROFIBUS, and the separation parameters for the oil grade being processed. Confirm the separator model and the existing protocol before ordering, because an unconfigured board will not integrate with the control room. Reconditioned boards are available where new stock lead time is long; verify firmware revision on receipt.
Compliance
Control component outside MED/USCG scope; must be configured to the engine-room protocol before commissioning.
Compatibility
Related
●RFQ answered within ~4 h at major hubs routed to vetted suppliers no public pricing
Frequently asked questions
- What does the EPC 50 board do?
- It manages the separator's automatic discharge cycle and interfaces with the engine-room monitoring system.
- Does a new board need configuration?
- Yes. Firmware must be set to the installed protocol (MODBUS or PROFIBUS) and the processed oil parameters.
- Are reconditioned boards available?
- Yes, when new-stock lead time is long; verify firmware revision on receipt.
Alfa Laval EPC 50 Separator Controller Board
No public pricing — quoted per request